All Products

Air Core Inductor Coils

Air Core Inductor Coils In order to achieve effective filter design, the radiation problem caused by flux leaving the core must be solved. This can be done by confining the differential mode flux to a magnetic structure (pot core), or by providing a...

Automotive inductors high frequency inductors

Automotive inductors high frequency inductors The common mode choke is useful because μcm is several orders of magnitude larger than μdm, because the common mode current is usually small and smaller μdm can be obtained by keeping L/D lower. In order...

Common Mode Toroidal Inductor 47UH

Common Mode Toroidal Inductor 47UH If the tester is cautious, the saturation characteristics of a common mode choke can be tested with a device similar to the one in MIL-STD-461. The application of this principle is as follows: Two current probes...

Ferrous Silicon Aluminum Toroids 22UH

Ferrous Silicon Aluminum Toroids 22UH It is often difficult to measure the saturation characteristics of the core (whole or part) of a common mode coil. A simple test shows to what extent the attenuation of a common-mode filter is affected by the...

High Current Inverter Inductor

High Current Inverter Inductor In the design of filter, it is assumed that the two parts of common mode and differential mode are independent of each other. However, the two parts are not truly independent, as a common mode choke can provide...

T25*15*13 Toroidal Wirewound Inductors

T25*15*13 Toroidal Wirewound Inductors The design of power filter can be considered from common mode and differential mode. The most important part of the common mode filter is the common mode choke. Compared with the differential mode choke, a...

High Current Vertical Inductor

High Current Vertical Inductor Loss of common mode inductance = Low EMI protection performance? Such a statement is obviously rather one-sided. Admittedly, due to the national EMI related specifications are not sound, some manufacturers in order to...

High Power Three Phase Common Mode Inductors

High Power Three Phase Common Mode Inductors Material: basically for ferrite, of course, this ferrite is also different, generally have MXO- manganese zinc and NXO- nickel zinc class. The main advantage of nickel-zinc class is that its initial...

Multilayer Flat Winding Wirewound Inductors

Multilayer Flat Winding Wirewound Inductors Magnetic ring type of iron core advantages: High initial magnetic conductivity (this is the basic requirement of common mode inductance), high saturation magnetic induction intensity, stable temperature...

T18*10*8 high current coil inductor

T18*10*8 high current coil inductor For an ideal inductance model, when the coil is wound, all the magnetic flux is concentrated in the center of the coil. But usually the annular coil will not wrap around a full, or winding system is not tight,...

Customized High Power Filter Inductors

Customized High Power Filter Inductors In fact, if one end of the filter circuit is connected to the interference source, the other end is connected to the interfered device, then La and C1, Lb and C2 constitute two sets of low-pass filters, which...

Iron Silicon Aluminum Blower Inductors

Iron Silicon Aluminum Blower Inductors The common mode inductor is essentially a bidirectional filter: on the one hand, it filters out the common mode electromagnetic interference on the signal line, on the other hand, it inhibits the...

High Power Common Mode Inductors

High Power Common Mode Inductors The motherboard inside the computer is mixed with a variety of high-frequency circuits, digital circuits and analog circuits. When they work, a large number of high-frequency electromagnetic waves interfere with each...

High Power Vertical Toroidal Inductor

High Power Vertical Toroidal Inductor A third-order filter ideally produces an attenuation of 18dB per octave at the cutoff frequency (multiple cutoff frequency points if the three corner frequencies are not synchronized), which is the most...

Ni-Zn Ferrite Motor Inductor

Ni-Zn Ferrite Motor Inductor Common mode Choke, also known as common mode choke, is used to filter common mode electromagnetic interference signals in computer switching power supply. In the board design, the common mode inductor also plays the role...

Silicon Aluminum Horizontal Inductors

Silicon Aluminum Horizontal Inductors The simplest and cheapest filter is the first order filter. Such filters use a resistive element to store energy over a certain frequency band, but at the same time do not transmit energy to the load. As for the...

T38*19*13 Choke Coil Inductor

T38*19*13 Choke Coil Inductor Toroidal coil, using iron powder core or manganese zinc and special resin for materials to produce large inductance, high current, anti-interference countermeasures, is one of the common power inductors. Toroidal coil...

Vertical Ferrous-Silicon Aluminum Motor Inductor

Vertical Ferrous-Silicon Aluminum Motor Inductor The second order filter uses two resistible elements, and this arrangement has two advantages over the first order filter: a) Ideally, the second order filter provides attenuation of 12dB per octave...

Toroidal Inductors 22uh 47uh

Toroidal Inductors 22uh 47uh Selecting the element values of a common-mode filter does not require a very complicated process. A relatively simple and intuitive design process can be achieved using standard filter arrangements, although these...

T22*14*8 double-wound wire inductor

T22*14*8 double-wound wire inductor Product Type: Ferrous silicon aluminum differential mode inductors. Style: Core size and permeability Inductance: For example, "180" means 18 uH. Inductance tolerance: "M":+20%; "K":+10%; "J":+5%. UL or PVC heat...

Horizontal Ferrous Silicon Aluminum Toroidal Inductor

Horizontal Ferrous Silicon Aluminum Toroidal Inductor Toroidal inductor toroidal coil, package form is plug-in inductor, winding form is single layer dense winding type, conductor nature is ferrite core, core shape is toroidal, operating frequency...

Horizontal Ferrous Silicon Aluminum Toroidal Inductors

Horizontal Ferrous Silicon Aluminum Toroidal Inductors Common mode filters usually use ferrite cores, double - wire and wound. Low differential mode noise signals suppress interference sources and are difficult to deform in high speed signals. Noise...

High Power Ferrous Silicon Aluminum Toroidal Inductor

High Power Ferrous Silicon Aluminum Toroidal Inductor Strict selection of raw materials Strict selection of raw materials, do not use inferior materials, high current resistance without short circuit, exquisite structure, beautiful appearance Fine...

56UH/68UH Yellow and White Toroidal Inductor

56UH/68UH Yellow and White Toroidal Inductor It is commonly used to filter common mode EMI signals in switching power supplies of computers. In board design, common mode inductors also play a role in EMIEMC filtering, 5G communications, power...